Adding a FTP Proxy

It is simple to add an FTP Proxy in WinGate. FTP uses port 21.

To Add a FTP Proxy

1. Open the services branch on the Configuration pane.

2. Right click on any service and select ‘NEW Service - FTP Service’.

3. Select ‘Enable connections to proxy on port’, and type in the port number. This is usually 21 unless you have a FTP server running on that port. In that case try port 140.

4. If you have an external firewall, enter the host and port details and check the “Use firewall” option.

5. Click OK, and you are done!

You may also run an FTP server on your network and have it accessible through WinGate from the Internet or your local LAN as though WinGate were an FTP server. If so:

Click on the Non-Proxy Requests tab, and enter the address and port number of the machine that your FTP server is running on.

See Integrating WinGate with other services.